Metalworking Machinery

This is a used 60 x 48 blast cabinet in good working condition.  It is a complete self contained blast system that consists of the main blast cabinet, cyclone, screen section, blast generator, and dust collector.  The cabinet has a swinging door on the left side and vertical sliding door on the right side.  The left door has an externally mounted motor with shaft that enters the chamber for the purpose of spinning a basket but the basket itself is not included.  Working area inside the cabinet is 60x48x36".  

We applied air to the system and tested as many functions as possible without pouring in media.  Pressing the foot pedal triggers the blast valve, pinch valve and dump valve as it should.  The machine is in overall good condition and it was painted recently.  Once the machine is installed it will need a new HEPA filter,  two filter cartridges and possibly a few more minor items. This unit originally came with a rotational basket option, but a basket is not included.  It also had a trolley car frame that mounted next to the sliding door to slide into the work area, but the frame is not included.  

• work area" 60x48deep x 36" high
• left door opening: 46" w x 34" high
• right counterbalance door: 44" w x 34" high
• operator window: 12.5 x 21.5"Long
• External tracks for workcar are not included but are mounted inside chamber
• reclaiming system
• cyclone: 600 CFM
• screen size: ABS #3500002 (med)
• storage hopper capacity: 1.0 cu ft
• pressure vessel capacity: 1.0 cu ft
• recommended abrasive: #80 aluminum oxide
• abrasive capacity: 106 lbs
• feed valve: tungsten carbide aerated feed valve
• feed valve grit stem: 1/8"
• blast nozzle: 3/16" tungsten carbide nozzle
• blast pressure 5-80 psi
• Dust collector: 
• capacity: 600 CFM at 10" SP
• filter media: two cartridges (452 cu ft) ( not included)
• exhauster 2 HP motor
• Options:
• HEPA filter (filter not included)
• Tungsten carbide feed valve
• rubber lined cyclone hose
• Air requirement: 3/4" NPT supply. 85 CFM at 80 PSI
•